Issue
Copyright (c) 2026 Anis Ahmad Chaudhary

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
The undersigned hereby assign all rights, included but not limited to copyright, for this manuscript to CMB Association upon its submission for consideration to publication on Cellular and Molecular Biology. The rights assigned include, but are not limited to, the sole and exclusive rights to license, sell, subsequently assign, derive, distribute, display and reproduce this manuscript, in whole or in part, in any format, electronic or otherwise, including those in existence at the time this agreement was signed. The authors hereby warrant that they have not granted or assigned, and shall not grant or assign, the aforementioned rights to any other person, firm, organization, or other entity. All rights are automatically restored to authors if this manuscript is not accepted for publication.Advances in algal biofuel production through catalysts and nanocatalysts: an integrated chemical, biochemical, and physical analysis
Corresponding Author(s) : Anis Ahmad Chaudhary
Cellular and Molecular Biology,
Vol. 72 No. 1: Issue 1
Abstract
Biofuel has emerged as one of the most promising alternatives to petroleum-derived fuels, particularly in the current context of rapidly depleting fossil fuel reserves. The combustion of fossil-based fuels poses serious risks to both the environment and human health due to the release of greenhouse gases. This study aimed to assess the fatty acid methyl ester (FAME) composition, viscosity, acid number, and chemical metal elements present in algal biodiesel produced through a transesterification bioprocess. Nanoparticles (NPs) offer a promising solution to current challenges in biomass utilization. Their advantages include high selectivity, energy efficiency, effective time management, and reduced costs. Biodiesel conversion yield, along with its physical and chemical properties, was analyzed using GC–MS and a multi-element oil analyzer. The highest conversion yield of 98.9% was achieved using a mixed catalyst–nanocatalyst system (NaOH + CaO + ZnO) under optimal conditions: a 1:4 oil-to-methanol volumetric ratio, 1.0% catalyst concentration, reaction temperature of 40°C, and stirring speed of 320 rpm. A significant difference was observed in the viscosity and acid value between biodiesel produced using a single catalyst and that produced using catalyst mixtures. Furthermore, the concentrations of chemical metal elements (Na, Ca, Mg, Cu, Fe, Zn, Ag, Al, P, Pb, B, Cr, Mn, Sn, Mo, Si, Ba, Ni, Ti, and V) were lower in biodiesel derived from mixed nanocatalyst–catalyst combinations (NaOH + ZnO, NaOH + CaO, and NaOH + CaO + ZnO) compared to the single-catalyst system (NaOH). Overall, biodiesel produced using the combined catalyst and nanocatalyst approach exhibited reduced metal element content and superior yield compared to biodiesel obtained using a single catalyst. In addition, nanomaterials such as nanocatalysts have been found to be cost effective as well as stable catalysts for enzyme immobilization, thus improving biofuel synthesis.
Keywords
Download Citation
Endnote/Zotero/Mendeley (RIS)BibTeX